System Performance

Not all motherboards are created equal. On the face of it, they should all perform the same and differ only in the functionality they provide - however, this is not the case. The obvious pointers are power consumption, but also the ability for the manufacturer to optimize USB speed, audio quality (based on audio codec), POST time and latency. This can come down to the manufacturing process and prowess, so these are tested.

For X570 we are running using Windows 10 64-bit with the 1903 update as per our Ryzen 3000 CPU review.

Power Consumption

Power consumption was tested on the system while in a single ASUS GTX 980 GPU configuration with a wall meter connected to the Thermaltake 1200W power supply. This power supply has ~75% efficiency > 50W, and 90%+ efficiency at 250W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency. These are the real-world values that consumers may expect from a typical system (minus the monitor) using this motherboard.

While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our testbed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers. These boards are all under the same conditions, and thus the differences between them should be easy to spot.

Power: Long Idle (w/ GTX 980)Power: OS Idle (w/ GTX 980)Power: Prime95 Blend (w/ GTX 980)

Despite a heavy controller count, the ASRock X570 Aqua managed to perform above expectations, with the same load power consumption as the previously tested ASUS Pro WS X570-Ace. The results at both idle and long idle power state also show the X570 Aqua in a very positive light.

Non-UEFI POST Time

Different motherboards have different POST sequences before an operating system is initialized. A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized). As part of our testing, we look at the POST Boot Time using a stopwatch. This is the time from pressing the ON button on the computer to when Windows starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)

Non UEFI POST Time

While not the fastest X570 model in terms of POST times, the ASRock X570 Aqua performs well considering the sheer number of controllers including two Ethernet controllers, a Thunderbolt 3 controller, and all the usual culprits. It should be noted that in our stripped test, the Aqua didn't allow us to disable either of the Ethernet controllers in the BIOS.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests such as audio will be further down the line. If the audio device requires data, it will have to wait until the request is processed before the buffer is filled.

If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time. This can lead to an empty audio buffer and characteristic audible pauses, pops and clicks. The DPC latency checker measures how much time is taken processing DPCs from driver invocation. The lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds.

Deferred Procedure Call Latency

We test the DPC at the default settings straight from the box, and the ASRock X570 Aqua didn't follow the trend we were expecting. ASRock desktop models tend to have the upper hand in out of the box DPC latency performance, but the Aqua performed noticeably worse this time around. It's still not the worst out of the box performance we have seen on X570, and it trades blows with the models in the middle of our results.

Board Features, Test Bed and Setup CPU Performance, Short Form
Comments Locked

84 Comments

View All Comments

  • Korguz - Thursday, December 19, 2019 - link

    TheinsanegamerN the same could be said about some of intels pricing, but people still bought/buy those cpu's, what's your point ?
  • eek2121 - Friday, December 20, 2019 - link

    Worthless? Hardly. The target audience is someone like me.

    A bit off-topic: AnandTech needs to update their GPU before they become the most 'worthless' site when it comes to reviews. The gaming benchmarks ARE worthless because the majority of the games tested are GPU bound on the 1080. It's time to make a jump to a 2080ti. For example, on my Linux Threadripper based system, I get a significantly better framerate from GTAV on my Threadripper 1950X AT 4K (!!!) with only a slightly better GPU. This is at stock settings. Every single game that AnandTech tests, I get significantly better performance (nearly twice the FPS in most cases) just by having a better GPU...and I'm on a Zen 1 based system vs. Zen 2.

    I'm usually defensive of AnandTech, however it's time for change.
  • Silma - Friday, December 20, 2019 - link

    Absolutely agree with you.
    This board really is aiming at a clientele who wouldn't know how to better spend or donate a thousand bucks.
  • Vatharian - Friday, December 20, 2019 - link

    Board itself is reasonably well equipped. Computer does not end on motherboard and CPU, it's currently the only board offering 10G Base-T, TB3 and WF6, except for X570 Creator, also from ASRock, and it costs exactly half - $500. For the 'worth' of board, look there. Would you pay $500 for monoblock? I would if I had maxed out other components and still cash left. It's convenient, actually, and every single monoblock-equipped board I have, is still working, thanks to always cool components. And $500 for full-board monoblock isn't outrageous, it would be more expensive to manufacture it by yourself.

    Now, if you don't see any point, then it's just not the product for you, and again, look at the Creator board.

    It's the same as full diy liquid cooling loop. Does it provide any extra performance over AIO? Barely, if any. Is it worth it given exorbitant costs? No. Will people continue making them? Yes.

    I have pimped out dual-cpu computer, with water cooled ram, vrms, chipset, both CPUs, gpus, 100G network card and fpga card, just because I simply wanted to. There is no benefit to it (and lots of hassle, as when I'll swap something it will be royal pita), but I still did it, just for the joy of it.
  • joesiv - Thursday, December 19, 2019 - link

    pinched inlet hose?
  • Stuka87 - Thursday, December 19, 2019 - link

    Optical illusion caused by the square edge of the aluminum block. I thought the same thing at a quick glance.
  • dcianf - Thursday, December 19, 2019 - link

    Users that mix this with other high performance watercooling components are in for a nasty surprise: this monoblock is aluminum while most other equipment (save for EK Fluid Gaming Aluminum kits) is copper or nickel. Aluminum is very galvanically active and would corrode in a mixed loop.
  • Stuka87 - Thursday, December 19, 2019 - link

    I didn't see any mention of it, but the aluminum inside the cooler looks like it has been plated. If thats the case, compatibility would not be an issue.
  • smarmy - Thursday, December 19, 2019 - link

    The X570 AQUA is the only completely water-cooled X570 motherboard – its unique all-copper cooling block covers the CPU, VRM and X570 Chipset to provide unbelievable performance and stability
  • GreenReaper - Saturday, December 21, 2019 - link

    Thank you, Mr. Bot, for that marketing spiel.

Log in

Don't have an account? Sign up now