System Performance

Not all motherboards are created equal. On the face of it, they should all perform the same and differ only in the functionality they provide - however, this is not the case. The obvious pointers are power consumption, but also the ability for the manufacturer to optimize USB speed, audio quality (based on audio codec), POST time and latency. This can come down to the manufacturing process and prowess, so these are tested.

For X570 we are running using Windows 10 64-bit with the 1903 update as per our Ryzen 3000 CPU review.

Power Consumption

Power consumption was tested on the system while in a single ASUS GTX 980 GPU configuration with a wall meter connected to the Thermaltake 1200W power supply. This power supply has ~75% efficiency > 50W, and 90%+ efficiency at 250W, suitable for both idle and multi-GPU loading. This method of power reading allows us to compare the power management of the UEFI and the board to supply components with power under load, and includes typical PSU losses due to efficiency. These are the real-world values that consumers may expect from a typical system (minus the monitor) using this motherboard.

While this method for power measurement may not be ideal, and you feel these numbers are not representative due to the high wattage power supply being used (we use the same PSU to remain consistent over a series of reviews, and the fact that some boards on our testbed get tested with three or four high powered GPUs), the important point to take away is the relationship between the numbers. These boards are all under the same conditions, and thus the differences between them should be easy to spot.

Power: Long Idle (w/ GTX 980)Power: OS Idle (w/ GTX 980)Power: Prime95 Blend (w/ GTX 980)

Despite a heavy controller count, the ASRock X570 Aqua managed to perform above expectations, with the same load power consumption as the previously tested ASUS Pro WS X570-Ace. The results at both idle and long idle power state also show the X570 Aqua in a very positive light.

Non-UEFI POST Time

Different motherboards have different POST sequences before an operating system is initialized. A lot of this is dependent on the board itself, and POST boot time is determined by the controllers on board (and the sequence of how those extras are organized). As part of our testing, we look at the POST Boot Time using a stopwatch. This is the time from pressing the ON button on the computer to when Windows starts loading. (We discount Windows loading as it is highly variable given Windows specific features.)

Non UEFI POST Time

While not the fastest X570 model in terms of POST times, the ASRock X570 Aqua performs well considering the sheer number of controllers including two Ethernet controllers, a Thunderbolt 3 controller, and all the usual culprits. It should be noted that in our stripped test, the Aqua didn't allow us to disable either of the Ethernet controllers in the BIOS.

DPC Latency

Deferred Procedure Call latency is a way in which Windows handles interrupt servicing. In order to wait for a processor to acknowledge the request, the system will queue all interrupt requests by priority. Critical interrupts will be handled as soon as possible, whereas lesser priority requests such as audio will be further down the line. If the audio device requires data, it will have to wait until the request is processed before the buffer is filled.

If the device drivers of higher priority components in a system are poorly implemented, this can cause delays in request scheduling and process time. This can lead to an empty audio buffer and characteristic audible pauses, pops and clicks. The DPC latency checker measures how much time is taken processing DPCs from driver invocation. The lower the value will result in better audio transfer at smaller buffer sizes. Results are measured in microseconds.

Deferred Procedure Call Latency

We test the DPC at the default settings straight from the box, and the ASRock X570 Aqua didn't follow the trend we were expecting. ASRock desktop models tend to have the upper hand in out of the box DPC latency performance, but the Aqua performed noticeably worse this time around. It's still not the worst out of the box performance we have seen on X570, and it trades blows with the models in the middle of our results.

Board Features, Test Bed and Setup CPU Performance, Short Form
Comments Locked

84 Comments

View All Comments

  • hbsource - Friday, December 20, 2019 - link

    *minority

    I should learn by now to re-read my own comments 10x on this site before posting.
  • lazarpandar - Thursday, December 19, 2019 - link

    I don't agree with TheinsanegamerN either, but your analogy here is horrible lol.
    A motherboard is not a fashion item and isn't comparable to one.
    It however isn't 'worthless' just because it's more expensive than other products that perform better, that's silly, it's just not worth $1000.
  • hbsource - Friday, December 20, 2019 - link

    Why isn't a motherboard a fashion item?

    Why is a handbag a fashion item?

    Who decides?
  • lazarpandar - Friday, December 20, 2019 - link

    Sure I agree the lines are blurry, but that's not a good argument as to why your assertion is correct. If your argument is "you don't get to decide", then that's my argument too, and we're logically back to before you even made that silly comparison in the first place.
  • Korguz - Friday, December 20, 2019 - link

    um.. maybe because fashion, is consider clothing ??
    " Fashion is a popular aesthetic expression in a certain time and context, especially in clothing, footwear, lifestyle, accessories, makeup, hairstyle and body proportions" how does that relate to motherboards, notebooks, etc ??
  • GreenReaper - Saturday, December 21, 2019 - link

    It's especially in clothing, but not only in clothing. There can be fashion trends in hardware (and software, for that matter), which rarely derive from any measurable performance factors - or if they do, they tend to apply only in certain cases.

    Just having a motherboard that costs $1000 will be something for a certain class of people to brag about. Having a system that doesn't break 40C, likewise. Whether it's actually "useful" is debatable, but that has never been the point of fashion.
  • Supercell99 - Wednesday, December 25, 2019 - link

    Women cant walk around with a motherboard on their arm to prove they have things other women can't.

    That's why motherboards aren't a fashion item.
  • hbsource - Thursday, December 26, 2019 - link

    The classic Wilde quote: A cynic knows the price of everything but the value of nothing.
  • TheSkullCaveIsADarkPlace - Friday, December 27, 2019 - link

    > A motherboard is not a fashion item and isn't comparable to one.

    Strange statement. It does not compute. Please explain the functional utility value of the gaudy silkscreen printing and (A)RGBs on the vast majority of consumer motherboards.
  • Flunk - Thursday, December 19, 2019 - link

    You're arguing utility vs marketable value. They're different things.

    Things are "worth" whatever you can sell them for. But it doesn't mean it's "worth" that money in the other sense of the word (as in the usable value of the item is equal to or higher than the cost paid).

Log in

Don't have an account? Sign up now