In this review, we are having a look at the first ITX motherboard based on Intel’s Z270 chipset to find its way into our labs, the ECS (Elitegroup Computer Systems) Z270H4-I Durathon 2 Mini ITX. The company’s approach is to create a compact and reliable, yet cost effective motherboard for typical home entertainment and gaming systems. A quick look at its specifications reveals very interesting features for a motherboard that retails for less than $110, with the marketing team even praising its overclocking capabilities. We will examine its core features and capabilities in the following pages of this review.

Other AnandTech Reviews for Intel’s 7th Generation CPUs and 200-Series Motherboards

($109) The ECS Z270H4-I Durathon 2 Review (mini-ITX)
($140) The ASRock Z270 Killer SLI Review
($140) The MSI Z270 SLI PLUS Review
($150) The Asus Prime Z270-A
($155) The GIGABYTE Z270X-Ultra Gaming

Best CPUs 2017 Guide

In comparison to the older Z170 boards, the new Z270 board on the base specifications are hardly any different. The Z270 ones have four extra PCIe lanes configurable on the chipset, potentially new audio and new networking controllers, and Intel Optane Technology Support. Although four extra PCIe lanes do sound like a huge difference, it is an important upgrade for the implementation of native M.2 slots (on Z170-based motherboards, this usually meant disabling some other device/port on the motherboard). Also, note that Intel Optane drives should still function on other chipsets as drives; the Z270 only allows them to enable their “smart caching” technology.

The Intel Optane Memory (SSD) Preview: 32GB of Kaby Lake Caching

Individual motherboard manufacturers will be sprinkling on new features onto their Z270 products to aid the transition and provide other tangible benefits over the old platform. To read specifically about the Z170 chip/platform and the specifications therein, our deep dive into what it is can be found at this link.

ECS Z270H4-I Durathon 2 Overview

The design of a low-cost motherboard is usually simpler than bigger designs, with the manufacturer sticking to the integration of the most common features. The ECS Z270H4-I Durathon 2 is, by contrast, an unusual product. With the company intending to market it towards gamers and overclockers rather than HTPC/casual users, the designers of the Z270H4-I try to implement features that gamers could use but, in order to keep the manufacturing cost low, skipped features that they thought gamers do not have a use for.

A quick glance reveals the presence of dual Gigabit LAN, something that we do not expect to find on cost-effective designs, for example, both of the Gigabit controllers are high-performance chipsets but from different manufacturers (Realtek 8118AS + Intel I-219V). The HD audio CODEC also comes from Realtek and is the popular ALC1150. It has four SATA 6Gb/s connectors, which are adequate for a Mini ITX motherboard. There are also two M.2 slots but only the one at the rear of the motherboard can support SSD drives. The M.2 slot at the front of the motherboard is for a WiFi/Bluetooth M.2 card, which is not included in this motherboard’s bundle. There are many USB 2.0 and USB 3.0 ports and headers, yet not a single USB 3.1 10 Gb/s Type-C or Type-A port, which is a cost cutting measure, unfortunately for anyone with a modern high-speed mobile or storage device.

As ECS is trying to promote the Z270H4-I towards gamers, and its marketing focuses most of their effort on the motherboard’s reliability and overclocking capability. On its default settings, the Z270H4-I does perform just as well (or even slightly better) than any of the Z270-based ATX gaming motherboards that we reviewed recently, yet that is because of the BIOS settings that allow the Z270H4-I to persistently run the CPU at its maximum turbo frequency. Other than that, the overclocking capabilities of the Z270H4-I left us indifferent - it has a very broad range of overclocking options but the actual capabilities of the motherboard are highly limited by its power circuitry and thermal design.

Quick Board Feature Comparison

Motherboard Comparison
  ECS Z270H4-I Durathon 2
Socket LGA1151 LGA1151
MSRP at Review $109 $140
DRAM 2 x DDR4 4 x DDR4
PCIe Layout x16 x8/x8
BIOS Version Tested 17.03.09 2.00
MCT Enabled Automatically? Yes Yes
USB 3.1 (10 Gbps) N/A None
M.2 Slots 1 x SSD
1 x WiFi-only
2 x PCIe 3.0 x4
U.2 Ports No No
Network Controller 1 x Intel I219-V / 1 × Realtek 8118AS 1 x Intel I219-V
Audio Controller Realtek ALC1150 Realtek ALC892
HDMI 2.0 No No

ECS Z270H4-I Durathon 2 Overclocking

Experience with ECS Z270H4-I Durathon 2

Even though ECS’s marketing is strongly focused on the overclocking capabilities of the ECS Z270H4-I Durathon 2, our overclocking experience was mediocre at best. The BIOS settings are more than adequate and the range of most options is very broad. Some of the voltage settings even are ridiculously broad, such as, for example, the motherboard allowing the CPU core voltage to go up to 2.5 volts.

A quick glance during our very first visit into the BIOS revealed that the Z270H4-I has, like most motherboards nowadays, the multi-core turbo option pre-enabled, boosting the turbo performance of the CPU up to 4.5 GHz for the first core and 4.4 GHz for the other three cores. This option is by default enabled on the vast majority of modern motherboards, allowing the system to temporarily push the CPUs slightly above their regular ratio. What is very peculiar however is that, by default, the BIOS is set to override the CPU power and ratio limits. Our preliminary testing revealed that, without manually tweaking any BIOS settings, the Z270H4-I was persistently pushing our 7700K up to 4.4 GHz with either single-thread or multi-thread loads.


Our standard overclocking methodology is as follows. We select the automatic overclock options and test for stability with PovRay and OCCT to simulate high-end workloads. These stability tests aim to catch any immediate causes for memory or CPU errors.

For manual overclocks, based on the information gathered from previous testing, starts off at a nominal voltage and CPU multiplier, and the multiplier is increased until the stability tests are failed. The CPU voltage is increased gradually until the stability tests are passed, and the process repeated until the motherboard reduces the multiplier automatically (due to safety protocol) or the CPU temperature reaches a stupidly high level (100ºC+). Our test bed is not in a case, which should push overclocks higher with fresher (cooler) air.

Overclock Results

Unlike other motherboards, the Z270H4-I does not have any “automatic” CPU overclocking settings that automatically tweak the CPU’s voltage and ratio to predefined values. Any overclocking needs to be performed manually. However, no matter the voltage and power limit settings, we soon found out that the Z270H4-I simply would not drive our 7700K above 4.5 GHz. As seen in the following picture, even though the CPU ratio was set at ×49, all power limits were disabled and there were no thermal issues, the motherboard is maintaining a CPU frequency of 4.5 GHz under full load. We are unsure if that is due to a BIOS bug that needs to be resolved or, most likely, due to the physical limitations of the motherboard’s power circuitry. We also had no luck with BCLK/FSB overclocking, as the Z270H4-I was entirely unstable with the frequency set at anything higher than 104 MHz.

ECS Z270H4-I Durathon 2 Board Features, Visual Inspection
Comments Locked


View All Comments

  • jabbadap - Tuesday, September 5, 2017 - link

    Erhm Your spec table says "Onboard M.2 none", yet there is one m.2 slot behind the motherboard if I'm not mistaken.

    Interesting little guy, though I would not OC with that tiny vrm heatsinks it has.
  • Ryan Smith - Tuesday, September 5, 2017 - link


    (There are actually 2, one on top and one on the underside of the board)
  • jtd871 - Tuesday, September 5, 2017 - link

    Thanks for the review.

    The lustre on the 200-series is wearing a bit thin, however, with Intel wooing consumers with the next-gen CPUs and chipset, so I'm not surprised to see some manufacturers trying to drum up a bit of business to move some inventory.

    I've always been a bit confused as to why motherboard manufacturers appear to cheap out on their mITX offerings (since mATX and mITX would seem to be better suited to the capabilities of the Z-series chipsets with the inherent limitations on PCI lanes than full ATX or E-ATX boards).

    Notes to mobo manufacturers and designers, here are some ideas on how to differentiate your product to consumers (other than price):
    1) Don't cheap out on the audio codec. Use the latest and greatest.
    2) If you're offering a Z-series chipset, include the power phases and connectors requires to overclock the top-of the line CPU SKU for the chipset, and choose heatsinks based on performance rather than looks.
    3) Consider dropping the number of SATA connections to 2: mITX systems generally don't run more than 2 SATA drives, and many these days just run a NVMe drive. Of the SATA connections you do offer, make them RAID-able. Use the freed-up HSIO lanes for more the latest I/O connectors.
    4) Especially for mITX, use the physically smallest I/O connectors practical and locate them, or at least 1 of each type, where a full-length PCIe card won't obstruct them.
    5) Include diagnostic LEDs (or even a separate diagnostic PCB that connects to a header on your board?) (to save space).
    6) Shamelessly copy (and, by all means, improve on) the best and most innovative features of your competitors' boards and BIOS.
    7) Read your product's reviews. Especially the critical ones.
  • Brianmmm - Monday, September 18, 2017 - link

    Maybe you're thinking of something like this? I have one, it rocks.
  • nathanddrews - Tuesday, September 5, 2017 - link

    I got really excited when I saw "Durathon" because I thought it was some new AMD chip I didn't know about.
  • MajGenRelativity - Tuesday, September 5, 2017 - link

    Return of the Duron?
  • artk2219 - Tuesday, September 5, 2017 - link

    You joke but i'd love to see that. Maybe name the new Raven Ridge APU's with failed GPU's Durons instead of athlons? Probably not, since sempron took Durons place, but i wouldnt mind it :).
  • BrokenCrayons - Tuesday, September 5, 2017 - link

    Eh, I know it's interesting and sometimes fun to overclock, but the performance benefit is typically insignificant without water cooling or a very large air cooler. Both of those cooling setups demand physical space so they increase the size of the system and that takes away some of the point in getting a Mini-ITX motherboard in the first place. ECS might be touting it as a feature, but I can't see it being a key selling point to even the small form factor gamer audience targeted by this motherboard. It probably doesn't matter much that its a rather limited capability of the board.
  • DanNeely - Tuesday, September 5, 2017 - link

    As I've observed before, the MITX mobo form factor is trying to serve two masters with different needs, desires, and general system configurations.

    The first - and who the form factor was originally created for - are people who want as small of a system as possible (but who don't find the NUC/etc compelling for whatever reason). For these people, you're right that any OC feature is likely to be unused. However they're not who it's being intended for.

    The second group of people building mITX are conventional gamers who've decided that other than a single GPU they have zero need of PCIe expansion slots, and thus no need for a larger mATX/ATX motherboard. They're still building conventional gamer type systems with a large enough PSU and sufficient cooling to consider an OC because they're using cases only a few inches smaller than what would be normal with an mATX build.
  • btmedic04 - Wednesday, September 6, 2017 - link

    Im surprised ECS is still around. I haven't used one of their products since the G45/intel pentium dual core system I put together for my dad way back when.

    As for the overclocking options, I could see them possibly being useful in an undervolting/underclocking scenario (say a passive build) or paired with a pentium g3258-like processor (please intel! the i3 7350k is overpriced for what it is)

Log in

Don't have an account? Sign up now