Lian Li has been one of the few large case manufacturers to consistently offer test benches over the years, and they have now launched their newest model, the PC-T70. First unveiled at CES 2017, this new test bench was developed with feedback from PC hardware reviewers and it has been designed with an eye towards easy access and simple hardware swapping. There is also an optional accessory kit that encloses the test bench with an acrylic cover, which simulates a closed-air environment and allows for testing conditions that more closely match a regular closed case. For those who would rather have the whole kit from the start, Lian Li will also be offering the PC-T70FX, which comes with the acrylic cover and side panels included.

Starting off with the fundamentals, the PC-T70 is manufactured from both aluminium and steel and it is available in both black and white. It can handle motherboards ranging from Micro-ATX to E-ATX, and it has eight expansion slots that support cards up to 330mm in length, though longer cards should be fine as well if you don't install the acrylic cover. There is one small and six large pass-through ports that are used to cleanly route cables to the lower half. The bottom chamber can handle one ATX power supply up to 330mm in length, and it is also where you can install your choice of either five 2.5” and one 3.5” storage drives or one 2.5” and two 3.5” storage drives. There is also mounting space for some liquid cooling hardware, namely an up to 360mm radiator, a reservoir, and a pump. The front of the test bench features a small I/O area consisting of a 3.5mm audio input, a 3.5mm audio output, two USB 3.0 ports, and both power and reset buttons.

If you have more advanced cooling needs, or if you're a reviewer that wants to be able to simulate a closed-air case environment, the T70-1 option kit is an accessory ​that is going to be of great interest:

As mentioned above, the optional T70-1 upgrade kit encloses the test bench with an acrylic cover and side panels that serve as radiator mounts. The idea is that by enclosing the motherboard and other heat-generating components, reviewers will be able to simulate closed-air case environments that are more representative of the insides of regular PC cases. This should ensure more accurate testing of both thermals and acoustics. It should be mentioned that with the cover installed, CPU cooler height is reduced from an effectively unlimited height down to 180mm. Magnetic strips help secure the cover and keep it closed during transport.

Also helping to secure the cover are the panels that enclose the side and back of the test bench. The aluminium side panels feature large cutouts with removable dust filters, and that is because each side panel can hold two 120-140mm fans or a single 240-280mm radiator. The rear panel has mounting holes for one additional 120mm or 140mm fan.

The PC-T70FX model, which includes the T70-1 option kit, is available right now at for $180 USD. It is unclear if the solo PC-T70 will be available for sale in the future, though we suspect that it will because it has its own product page on Lian Li's website.

Related Reading

Source: Lian Li

Comments Locked


View All Comments

  • Sarah Terra - Thursday, May 25, 2017 - link

    Nice unit, but would have like to have seen it 149 all in
  • JoeyJoJo123 - Thursday, May 25, 2017 - link

    It always came across as odd to me that test benches (ie: open air desktop cases, often with less panels/materials so as to make the process of swapping out components easily) cost more?

    It's like if buying a Jeep without the doors and no roof covers was more expensive than the fully enclosed jeep.
  • DanNeely - Thursday, May 25, 2017 - link

    It's a matter of volume. If it was just a normal case with the side panels not in the box it'd probably be cheaper (unless administrative/inventory costs from the low volume product eat the manufacturing savings); but what they're actually doing is designing an all new Jeep that doesn't come with any doors or roof panels as standard equipment and expecting them to only sell in 10% or 1% the volume of existing Jeep Wrangers, so you get stuck with a much larger share of the R&D costs padding the price of each unit sold.
  • futrtrubl - Thursday, May 25, 2017 - link

    Economies of scale. When you are churning out tens of thousands of something it's easier to make each individual one cheaper than if you are only making tens of them.
  • Ro_Ja - Thursday, May 25, 2017 - link

    I made my own test bench. It's really budget friendly if you know how to use non-computer hardware.

    This looks cool though, just pricey.
  • Samus - Thursday, May 25, 2017 - link

    Dimastech makes more functional, more customizable, less flashy, and WAY less expensive test stations.

    I ordered a few custom powder coated in orange (my corporate color) with a number of accessories including canvas covers for when not in use, for $130/each shipped from Italy years ago. Now they seem even cheaper because they have distribution in the US.

    Lian-Li is pricing this thing out of the tiny market it's already in.

Log in

Don't have an account? Sign up now