Meizu added a new flagship phablet to its smartphone lineup today. The new 5.7-inch PRO 6 Plus is the direct successor to the PRO 5, but it incorporates the updated styling from the smaller 5.2-inch PRO 6. On paper at least, the PRO 6 Plus appears to be a definitive upgrade relative to Meizu’s previously released phones, unlike the PRO 6 which trailed the older PRO 5 in performance, battery life, and audio quality and failed to separate itself from the similar but less-expensive MX6.

The PRO 6 Plus incorporates the same aluminum unibody construction and elegant styling as the PRO 6. The slightly raised, circular camera surround with Meizu’s circular, dual-tone LED flash ring below give the back of the PRO 6 Plus a distinct look. The plastic antenna strips are colored to better match the sandblasted aluminum chassis and stick close to the upper and lower edges to further minimize their appearance. Its rounded edges and radiused corners make it comfortable to hold, although its smooth finish makes it feel a bit slippery. The 2.5D edge-to-edge glass covering the front eliminates sharp edges, enhancing the smooth feel of the phone.

What separates the design of the PRO 6 and PRO 6 Plus from so many other metal unibody phones, however, is Meizu’s attention to detail. Every edge and hole—the camera surround, ring flash, speaker holes—has a polished chamfer, and the single piece volume rocker and power button near the top of the right edge are inset into a polished groove. All of these extra machining features give the PRO 6 phones a premium look and feel.

Meizu PRO 6 Series
  Meizu PRO 6 Meizu PRO 6 Plus
SoC MediaTek Helio X25

2x Cortex-A72 @ 2.5GHz
4x Cortex-A53 @ 2.0GHz
4x Cortex-A53 @ 1.5GHz
Mali-T880MP4 @ 850MHz
Samsung Exynos 8890

4x Exynos M1 @ 2.0GHz
4x Cortex-A53 @ 1.5GHz

4x Exynos M1 @ 2.6GHz / 2.3GHz
(1-2 core / 3-4 core load)
4x Cortex-A53 @ 1.6GHz
RAM 4GB LPDDR3-1866 4GB LPDDR4-3666
NAND 32GB / 64GB (eMMC 5.1) 64GB / 128GB (UFS 2.0)
Display 5.2-inch 1920x1080 SAMOLED 5.7-inch 2560x1440 SAMOLED
Dimensions 147.7 x 70.8 x 7.25 mm
160 grams
155.6 x 77.3 x 7.3 mm
158 grams
Modem MediaTek (Integrated)
2G / 3G / 4G LTE (Category 6)

Samsung Shannon
2G / 3G / 4G LTE (Category 12)

SIM Size 2x NanoSIM (dual standby) 2x NanoSIM (dual standby)
Front Camera 5MP, 1/4" OmniVision OV5695, 1.4μm, f/2.0 5MP, f/2.0
Rear Camera 21.16MP, 1/2.4” Sony IMX230 Exmor RS, 1.12µm pixels, f/2.2, PDAF + Laser AF, HDR, dual-tone LED flash 12MP, 1/2.9” Sony IMX386 Exmor RS, 1.25µm pixels, f/2.0, PDAF + Laser AF, 4-axis OIS, HDR, dual-tone LED flash
Battery 2560 mAh (9.73 Wh)
3400 mAh
Connectivity 802.11b/g/n/ac, BT 4.1 LE, NFC, GPS/GNSS, USB 3.1 Type-C 802.11a/b/g/n/ac, BT 4.1 LE, NFC, GPS/GNSS, USB 3.1 Type-C
Launch OS Android 6.0 with Meizu FlymeOS 5.2 Android 6.1 with Meizu FlymeOS 6

The Meizu PRO 6 Plus, like the PRO 5 before it, uses a 5.7-inch SAMOLED display from Samsung; however, resolution increases to 2560x1440, which is a vast improvement over the PRO 5’s 1080p panel whose pixel density was insufficient to overcome the limitations of its PenTile subpixel arrangement. The display’s brightness ranges from 3 nits to 430 nits in direct sunlight when using the auto-brightness boost feature, according to Meizu. Although an APL value was not specified, I assume these are for 100% APL based on our measurements of the PRO 6, which achieves 436 nits at 100% APL and 512 nits at 50% APL.

Meizu also claims 103% coverage of the NTSC color gamut, which is good news for people who prefer highly saturated, vivid colors. Meizu introduced several different screen modes, including a proper sRGB mode, in FlymeOS 5.2, along with a color temperature slider, to allow for some adjustment of the display’s output, although it’s unclear if these features carry over to FlymeOS 6.

Most phones are now incorporating special night modes that filter out blue light for nighttime reading or low-light situations, and the PRO 6 Plus is no exception. It’s also the first Meizu phone to come with an always-on display (AOD) that shows the time, date, battery level, and notifications when the phone is locked. If enabled, Meizu claims it only consumes 1% of the battery’s charge per hour.

Inside the PRO 6 Plus is an Exynos 8890 SoC. Meizu has used Samsung’s Exynos chips in previous phones, most recently the Exynos 7420 in the PRO 5, and with Snapdragon 820/821 off the table because of its ongoing licensing disagreement with Qualcomm, the Exynos 8890 is a logical choice. The octa-core CPU uses a big.LITTLE pairing of four low-power ARM Cortex-A53 cores and four higher-performance, custom Exynos M1 cores from Samsung. Core frequencies vary depending on which storage option is selected. The version with 64GB of UFS 2.0 NAND uses a lower-binned SoC that limits the peak frequency of the Exynos M1 cores to 2.0GHz and the A53 cores to 1.5GHz, while the version with 128GB of internal storage allows the A53 cores to run at 1.6GHz and the M1 cores to run at up to 2.3GHz when three to four cores are active or 2.6GHz for better single-threaded performance when only one or two cores are active. Both versions use an ARM Mali-T880 GPU and come with 4GB of LPDDR4 RAM, but the lower-binned SoC only includes ten cores instead of the Exynos 8890's usual twelve like in the 128GB version. While the amount of internal storage is reasonable, there’s no microSD support for storage expansion.

The PRO 6 Plus’ 3400mAh battery is a little on the small side given its size. Huawei’s 5.9-inch Mate 9 comes with a 4000mAh battery, for example. Even several smaller 5.5-inch phones such as Samsung’s Galaxy S7 edge (3600mAh), Xiaomi’s Redmi Note 3 Pro (4050mAh), and Meizu’s own M3 note (4100mAh) come with larger batteries. Meizu clearly prioritized thickness and weight over battery capacity, but we’ll have to wait and see how it performs in our battery tests before we can assess the impact of this decision. Regardless of how long the battery lasts, it should charge quickly thanks to Meizu’s mCharge fast charging technology that pulls up to 24W (8V/3A) at the wall.

Around back is a 12MP camera based on Sony’s IMX386 Exmor RS sensor with 1.25µm pixels. It employs a hybrid autofocus system that combines the benefits of phase detection (PDAF), laser, and contrast methods. The PRO 6 Plus also includes 4-axis optical image stabilization (OIS), a first for Meizu, which should help improve low-light photography by allowing sharp exposures up to 0.25 seconds. Covering the camera sensor is a 6-element lens array with f/2.0 aperture. Meizu also says its improved image-enhancing algorithms and noise processing take full advantage of Samsung’s integrated ISP.

One of the PRO 5’s best features was its excellent sounding audio subsystem. The PRO 6 took a more traditional approach and its results were disappointing by comparison. Fortunately, the PRO 6 Plus uses the same ESS Technology es9018k2m SABRE32 DAC as the PRO 5, which supports 16/24-bit audio from 44.1kHz to 192kHz with a dynamic range of 127dB and low noise. It also includes a dual-channel AD45275 power amplifier from Analog Devices.

The PRO 6 Plus comes with a touch-based, capacitive fingerprint scanner integrated into the front-mounted home button along with Meizu’s pressure sensitive screen technology it calls 3D Press, which the PRO 6 and PRO 6s also include. Because the software API’s are proprietary, the ability to press an icon on the home screen and open a shortcut menu or press on a hyperlink, email, or text message to open a preview are generally limited to Meizu’s apps.

In addition to 3D Press support, Meizu’s new FlymeOS 6 includes more than 400 new features, including the “One Mind” artificial intelligence engine that optimizes system performance by monitoring how the phone is used and prioritizes resources to the most used apps.

The PRO 6 Plus is available in three different colors: gold, gray, and silver. The gold and silver colors come with a white front, while the darker gray color comes with a black front. You can also choose between 64GB (¥2,999) or 128GB (¥3,299) of internal storage. The integrated Samsung Category 12 LTE modem supports 5-mode operation (no CDMA) and the following frequency bands (no LTE support in the US): FDD-LTE B1 / B3 / B7, TDD-LTE B38 / B39 / B40 / B41, WCDMA B1 / B2 / B5 / B8, TD-CDMA B34 / B39, GSM 850 / 900 / 1800 / 1900 MHz. It will be available in many Asian and European countries in December.

Comments Locked


View All Comments

  • jjj - Wednesday, November 30, 2016 - link

    They have the Pro 6S too not just the 6 and 6 Plus.

    And ofc the Meizu Meilan X launch is the more interesting today as it is the first phone with Mediatek Helio P20 and the first with LPDDR4X.
  • jjj - Wednesday, November 30, 2016 - link

    One more thing, can you check if it has a heart rate sensor in the home button and how does it work- is it a discrete sensor or someone has added this functionality to their fingerprint sensor.
  • Matt Humrick - Wednesday, November 30, 2016 - link

    According to the press release, the fingerprint sensor located in the home button doubles as a heart rate sensor sampling at 50 times per second.
  • jjj - Wednesday, November 30, 2016 - link

    That would be very interesting.In theory using capacitive sensing for heart rate should be doable but not exactly easy and wasn't aware that anyone has the capability.
    Not much of an upside in having such a sensor in a phone but ,if it's a free lunch, why not and we would likely see it in many other phones soon.
    Curious to see how accurate it is.
  • Matt Humrick - Wednesday, November 30, 2016 - link

    Good point. It looks like the primary difference between the PRO 6 and PRO 6s is battery size (2560mAh vs 3060mAh). Also, the PRO 6s camera is similar to the PRO 6 Plus.
  • jjj - Wednesday, November 30, 2016 - link

    The 6s has bigger battery, different cam (better most would argue , at least because of OIS) and NAND starts at 64GB vs 32GB with the 6.
  • Geranium - Wednesday, November 30, 2016 - link

    What is the die size of Exynos 8890?
  • veewus - Thursday, December 1, 2016 - link

    For the PRO 6 Plus 64gb version, the GPU is MP10
  • veewus - Thursday, December 1, 2016 - link

  • lid - Thursday, December 1, 2016 - link

    Thank you for including LTE band compatibility!

Log in

Don't have an account? Sign up now