When Seagate first announced the Game Drive for Xbox, they chose Gamescon as a venue to launch the new product. With the prolific Xbox branding, this is not a drive they would expect you to purchase for use with your MacBook. Not that you couldn’t of course, but they seem to have a pretty clearly defined target market for the Game Drive.

When Microsoft first launched the Xbox One, it came with a 500 GB internal drive, of which about 360 GB is available for the end user. Since that time, they have also released models with 1 TB of internal storage. It is unfortunate that the Xbox One does not feature an easily replaceable drive, but a few months after release they added support for external USB drives. The Seagate Game Drive for Xbox is specifically designed for this role. It has been certified by Microsoft for use with the Xbox, but mostly it has been branded with Xbox and colored Xbox green.

The package comes with just the drive and a micro USB 3.0 cable for use, which is 18-inches in length. The drive is pre-formatted with NTFS and if you want you can of course use this as a USB 3.0 storage drive on a PC as well. Maybe you are an Xbox fan. The drive is powered by the USB cable as well so there are no other connections necessary.

Configuring the drive for use with the Xbox is as easy as plugging it in. The Xbox will detect it and ask if you want to format it for use with games and content, and you just say yes. Easy as that.

Once installed on the Xbox it will ask you if you want to use it as the default save location for new downloads and game installs. The Xbox does not pool this drive, which makes it slightly more complicated to use since if you want your existing games there you have to move them. Pooling would make this seamless for the end user. The advantage of pooling though is that you can bring your Game Drive with you over to another Xbox and you will be guaranteed that your games are there, so you can just start playing.

As someone who has been around the field for a while, it continues to amaze me how much storage they can fit into a magnetic platter. The Game Drive for Xbox is 2 TB (calculated in base 10 for reasons only marketing would be able to explain) and adds a significant amount of storage to the Xbox One without being bulky. It is very small and quiet, being a laptop based drive. There are no cooling fans to fail, or ramp up in volume.

Performance of the Game Drive for Xbox is quite good for a small spinning drive. Read and write speed for sequential files is over 130 MB/s and being a spinning disk, random workloads fall well below that maximum speed.

The physical device measures 117mm x 80mm x 14.8mm and weighs 170 grams. It is actually smaller in person than I expected from the product shots. The green case is only green on the top, and black underneath. I like the green, but considering the Xbox One is generally black, it kind of stands out and doesn’t really match any home theatre equipment.

So do you need a green USB hard drive for the Xbox? No, of course not. Considering the package is only a couple of dollars more than Seagate’s standard 2.5-inch drive USB 3.0 product, I appreciate them trying to reach out to a different audience than those who just want a basic black hard drive, and in case you were wondering, it also works with the Xbox 360.

POST A COMMENT

41 Comments

View All Comments

  • willis936 - Thursday, October 8, 2015 - link

    It's not a geek vs. idiot issue. Computers address using binary. If you want to have bits on a drive then the total usable amount is going to be in powers of two. Maybe you make a hard drive with 10^13 bits (or 1.25 trillion bytes). You'll only be using 2^43 bits (or 1.099511627776 bytes). Reply
  • willis936 - Thursday, October 8, 2015 - link

    2^43 bits = 1.099511627776 *trillion bytes Reply
  • nightbringer57 - Thursday, October 8, 2015 - link

    No. You'll be using the whole 10^13 bits if the addresses are 44 bits or more. I fail to see the point. Reply
  • nils_ - Tuesday, October 13, 2015 - link

    Also you can only write 512B or 4KiB blocks. Reply
  • nightbringer57 - Thursday, October 8, 2015 - link

    There is a base in this. If you continue to do different from everyone else just because it has always been so, you end up with a confusing mess. No matter how the habits are strong, there comes a point where having 1 kB = 1024 B while 1 kg = 1000 g, 1 km = 1000m, 1 kV = 1000 V and even 1 kb/s = 1000 b/s is objectively stupid. Redefining your habits so that everything is unambiguous for everyone is much better, for everyone. And it's even more true when redifining your habits only mean adding a 'i' in the middle when it's necessary.... Reply
  • Alexvrb - Monday, October 12, 2015 - link

    But these are binary systems. Their mistake was borrowing familiar notation. Reply
  • woggs - Thursday, October 8, 2015 - link

    It's not about lying or evil on the part of drive makers. A client SSD needs ~8% spare nand capacity for background activity. Installing 1GiB of nand yields 1GB of user capacity and the right amount of spare to function properly. Misiu_mp showed the math above... 10% total spare for FW meta data and extra for background activity. Since each manufacture ended up a little different, IDEMA created a standard get them in sync across models and companies. http://www.idema.org/wp-content/plugins/download-m... Reply
  • GokieKS - Thursday, October 8, 2015 - link

    No, there is actually a factual and historical basis for base 10 - those are BIPM SI prefixes with specific meanings in terms of 10^n, and the most common ones (e.g. "kilo-") have been in use dating back centuries. It's the people who co-opted them for use to describe 2^n who were wrong (or rather, inaccurate). Reply
  • Gigaplex - Thursday, October 8, 2015 - link

    I love how the people arguing for base 2 claim it's because the base 10 camp are too young to remember the history. SI prefixes are much, much older than the base 2 JEDEC prefixes. I bet you didn't know that only K, M and G existed in base 2 JEDEC, there was no binary based TB. Reply
  • Wolfpup - Thursday, October 8, 2015 - link

    I'm actually thinking of buying this, under the hope that maybe it'll keep some wear and tear off the internal drive. I HATE that that thing isn't user replaceable...for that matter I also hate the "cloud saving" thing. Optional? Fine. But I want to manage my own saves, not have the only way to transfer stuff be through a small "cloud" storage that will eventually go away. Not to mention my One burns through a ton of data just playing normal offline single player games, I guess through constantly uploading saves... Reply

Log in

Don't have an account? Sign up now