Visual Inspection

Even though the ASRock X399 Professional Gaming is targeted to gamers, its design is not as extravagant as we expected it to be. Perhaps the only thing that stands out in terms of aesthetics are the sharp, futuristic heatsinks. The two heatsinks that cool the processor's VRM circuitry are connected with a heatpipe but there is no extra fan for active cooling. The designer used black color for the PCB and plastics, and preserved the natural color of metal for all metallic parts, creating a nice visual antithesis. RGB lighting is present but limited to the area surrounding the chipset's heatsink, with headers for adding external 12V RGB LED strips. Note that this motherboard does not support RGBW or digital RGBW/UV LED products.

ASRock advertises the X399 Professional Gaming as having an 11-phase design. Actually, the motherboard has an 8-phase VRM circuit that uses the International Rectifier (Infineon) IR35201 digital controller, plus another 3-phase VRM circuit for the SoC. There is nothing irregular here, with ASRock going with a by-the-book approach and installing IR3555 MOSFET drivers (rated at 60A each) and 60A inductors.  The IR35201 is a digital controller by International Rectifier that evenly distributes the load across the eight phases at all times, greatly improving the longevity of the components. The power circuitry is more powerful than that of less costly motherboards, potentially allowing for higher overclocks and, perhaps, compatibility with future versions of the Ryzen Threadripper processor.

 

The audio circuitry is interesting. It sports a Realtek ALC 1220 chipset as its core and an additional Texas Instruments NE5532 amplifier for the headphones. The main chipset is rated for a maximum rated sound-to-noise ratio (SNR) of 120dB. To help achieve that performance figure, ASRock physically isolated the right/left channel audio channels on individual layers and is using Nichicon audio-specific capacitors. The sound circuitry supports the Creative Sound Blaster Cinema 3 Software.

The layout of the ASRock X399 Professional Gaming generally is good but there are some questionable design choices. As expected, most of the internal headers have been placed across the bottom edge of the motherboard. From left to right, there are two front panel audio headers, one standard and one vertical, a COM port header, a header for a 12V RGB strip, a standard 4-pin fan header, a TPM header, an extra power LED/system speaker header, two headers for USB 2.0 ports, a small CMOS reset switch, a debugging LCD, one USB 3.1 Gen 1 header, two gold-colored power/reset buttons, and the system switch/LED header. There is a second USB 3.1 Gen 1 header to the right of the motherboard, right next to the ATX 24-pin power connector.

Oddly, ASRock installed a 6-pin PCIe connector on the lower right edge of the motherboard that serves as an additional power source. The use of an extra power connector is not strange on AMD X399 motherboards that support quad SLI but the choice of this particular connector is, as it would force users who want to use four graphics cards to use an adaptor on Molex connectors because mosts PSU will top out at eight PCIe connectors.

Eight SATA connectors can be seen to the lower right side of the motherboard, all facing rightwards. A U.2 PCIe ×4 connector is present right above the SATA connectors. The ASRock X399 Professional Gaming also has three M.2 PCIe ×4 slots and all three support drives up to 80 mm long - there are no slots that support 110 mm long drives on the ASRock X399 Professional Gaming. One of the slots supports the currently rare ultra-short 32 mm M.2 devices. Unlike with other manufacturers, none of the M.2 slots has any heatsinks. No PCI lanes are being shared between the three M.2 slots, meaning that they can all run at ×4 simultaneously. However, the U.2 slot shares its lanes with the third M.2 slot and will disable this slot entirely should a U.2 device is installed.

Another odd design choice, as shown below, is the placement of the CPU's EPS power connectors. The 8-pin and 4 pin 12V CPU connectors are placed at the top right and top left side of the motherboard respectively. ASRock advertises this as an advantage, as it creates a wider trace for the CPU's VRMs. The concept is technically sound from an engineering point of view but it also could create compatibility problems because several PSUs have both CPU 12V connectors on a single cable, meaning that an extension would be necessary to reach the second connector on the motherboard. A thicker copper layer would certainly produce better results but, since ASRock is already using a 2oz copper PCB, a thicker copper layer would greatly increase the motherboard's manufacturing cost. Another odd design choice is the placement of two fan headers between the CPU's socket and the first PCIe slot, where they will be practically inaccessible after a CPU heatsink and a graphics card are installed.

USB connectors dominate the rear panel of the ASRock X399 Professional Gaming. Starting from the top of the motherboard, we can see a small BIOS "flashback" switch, two USB 3.1 Gen 1 connectors and a PS/2 combo connector, two wireless antenna connectors, two USB 3.1 Gen 1 connectors, five gold-plated 3.5 mm audio jacks and one optical SPDIF connector, two USB 3.1 Gen 1 connectors and the red Aquantia 10Gbps NIC, another two USB 3.1 Gen 1 connectors and the first I211-AT NIC, and, finally, the two USB 3.1 Gen 2 10 Gbps connectors (one Type-A and one Type-C) and the second I211-AT NIC.

ASRock X399 Professional Gaming Overview Board Features
POST A COMMENT

45 Comments

View All Comments

  • bug77 - Thursday, July 5, 2018 - link

    "However, with a price tag of $440, the X399 Professional Gaming also is one of the most expensive Ryzen Threadripper motherboards available."

    And yet, the title of the article says it's "for all".

    Also, Threadripper is a rather poor choice for gaming. Even if you're streaming, you don't need that many cores. Threadripper is really good is you massively edit photo or edit video or do 3D rendering and few other specialized things. But not for much else.
    This is not a criticism, with today's CPU one has to carefully weigh whether they need more cores or faster cores, depending on their usage patterns. There no universal solution like there was back in the single-core CPUs day. (And even then, if you didn't need FPU performance, a much cheaper AMD CPU could have been the better pick.)
    Reply
  • Myrandex - Thursday, July 5, 2018 - link

    Eh the original single core Athlon 64 CPUs even had pretty banging FPU performance back in the day too. Reply
  • bug77 - Thursday, July 5, 2018 - link

    True, but the original K6 didn't ;) Reply
  • DanNeely - Thursday, July 5, 2018 - link

    It's "10G For All", the for all is attached to the 10G ethernet support, meaning it's a thread-ripper board with 10G for both gaming and work station use. It's more expensive than general use boards of either category because the 10G controller is still seriously expensive. If you don't need 10G ethernet, it's probably not the board you want because of the price premium attached for it. Reply
  • bug77 - Thursday, July 5, 2018 - link

    So... it's not for all. Reply
  • eek2121 - Thursday, July 5, 2018 - link

    I would have to disagree there. Windows has hundreds of thousands of processes running in the background and when Threadripper is set up properly it performs great with gaming. Even if you do able 8 of the cores you can easily beat out the 1800X from an IPC perspective thanks to lower cache latencies (Threadripper has similar cache latencies to the 2700X). The higher XFR boost (4200hz), slightly better IPC, quad channel memory, and more cores means a better gaming experience than the 1800X...if you can afford it. Reply
  • bug77 - Friday, July 6, 2018 - link

    I didn't say it performs poorly. But perf/$ isn't the best for many workflows. Reply
  • Marlin1975 - Thursday, July 5, 2018 - link

    It says Creative SoundBlaster on the cover yet the description says Onboard Audio Realtek ALC1220A?

    This just some marketing/software so it makes it seem nicer?
    Reply
  • tmediaphotography - Thursday, July 5, 2018 - link

    "It supports the Sound Blaster Cinema 3 software"

    Realtek hardware, but anyone who is perversely attached the Creative Labs software can feel free to install and use the Cinema 3 software.
    Reply
  • DanNeely - Thursday, July 5, 2018 - link

    Sound blaster switched from custom hardware to just being a custom driver for other audio hardware a few years ago. Reply

Log in

Don't have an account? Sign up now