In a fairly unexpected move, AMD formally demonstrated at Computex its previously-roadmapped 7nm-built Vega GPU. As per AMD's roadmaps on the subject, the chip will be used for AMD’s Radeon Instinct series accelerators for AI, ML, and similar applications.

The 7nm Vega GPU relies on the 5th Generation GCN architecture and in many ways resembles the Vega 10 GPU launched last year. Meanwhile, the new processor features a number of important hardware enhancements, particularly deep-learning ops specifically for the AI/ML markets. AMD isn't detailing these operations at this point, though at a minimum I'd expect to see Int8 dot products on top of Vega's native high speed FP16 support.

AMD also briefly discussed the use of Infinity Fabric with the new 7nm GPU. AMD already uses the fabric internally on Vega 10, and based on some very limited comments it looks like they are going to use it externally on the 7nm GPU. On AMD's Zeppelin CPU dies - used in the EPYC CPU lineup - AMD can switch between Infinity Fabric and PCIe over the same lanes depending on how a product is configured, so it's possible we're going to see something similar here. In other words, AMD can kick in Infinity Fabric when they have something else to connect it to on the other end.

As a part of its demonstration, AMD also disclosed that the prototype Radeon Vega Instinct accelerator card carried 32 GB of HBM2 memory spread across four KGSD stacks. Assuming that these are 1024-bit HBM2 stacks, it looks like the new Vega got a 4096-bit bus, which will be welcome with the HPC crowd.

Otherwise, AMD is not disclosing the exact specifications of the 7nm Vega GPU, so we don't know how many CUs and other functional blocks the chip has. Compared to GloFo's 14nm process, the density savings of 7nm are significant. However I fully expect AMD to immediately reinvest those savings into more CUs, more memory controllers, etc.

Though based on some very rough paper napkin math coming the size of the HBM2 packages to the GPU die, a really conservative estimate for the die size puts it around 14mm X 24mm, or 336mm2. Though this is quite likely an underestimate, and we'll redo our calculations if we can get some better photos of the chip.

One especially bright spot for AMD here is that their shipping schedule has moved up by at least a quarter. Previously AMD was going to have the 7nm GPU sampling by the end of the year and shipping in 2019. Instead the 7nm Vega GPU is sampling now and the launch window has been moved up to H2'18. This is an incredibly aggressive schedule, given that we're only expecting the first 7nm SoCs - decidedly smaller devices that make for good pipecleaners - to ship in the same timeframe. So AMD appears to be taking the NVIDIA route and shipping their big GPU early, eating any yield issues in the process. It's a risky strategy, but if customer demand is there, then as we've seen in NVIDIA's case, it can pay off handsomely.

Finally, Lisa Su also quickly reiterated that the rest of AMD's GPU roadmap hasn't changed from earlier this year. This means that after the 7nm Vega GPU for compute users, AMD will be bringing 7nm GPUs out to gamers & other consumers as well in the form of Navi. AMD has not announced a timeframe for this, but we're certainly not expecting this until sometime in 2019.

POST A COMMENT

29 Comments

View All Comments

  • mczak - Wednesday, June 6, 2018 - link

    4x512bit = 4096 bit? Reply
  • Ryan Smith - Wednesday, June 6, 2018 - link

    Okay, Anton's math was a bit short there.

    (Thanks for the heads up. Fixed!)
    Reply
  • Tonyco2505 - Wednesday, June 6, 2018 - link

    TSMC 7nm Reply
  • 5080 - Wednesday, June 6, 2018 - link

    No, it's GF 7nm Reply
  • deksman2 - Sunday, June 10, 2018 - link

    Actually, AMD will be using glofo 7nm for zen2 and TSMC 7nm for GPUs Reply
  • iwod - Wednesday, June 6, 2018 - link

    I am surprised they are still using GF for 7nm. Given how capacity constraint they are, wouldn't moving the whole GPU lineup to TSMC makes more sense ? Or may be I am guessing porting VEGA from GF 14nm to GF 7nm is a lot easier / economical.

    I really hope GPU maker will split the GPU design between Gamer and GPGPU. So GPU prices will stay normal.
    Reply
  • T1beriu - Wednesday, June 6, 2018 - link

    Lisa confirmed a couple of months ago that INSTINCT Vega 7nm is built at TSMC using 7nm. Reply
  • iwod - Wednesday, June 6, 2018 - link

    Well it is literally the first sentence in the article.

    >In a fairly unexpected move, AMD formally demonstrated at Computex its previously-roadmapped Vega GPU made using GlobalFoundries’ 7 nm (7LPP) process technology.
    Reply
  • wumpus - Thursday, June 7, 2018 - link

    This seems to be edited out. I'd be surprised if they spent the extra money to get Vega on 7nm early on GF (and get the process working) and then turn around and use TSMC (although they might eventually move things over there, I doubt it will be still a new process when they do).

    Even if they had contractual issues with GloFo, they'd still be able to hand them enough CPU orders to cover any GPU shortfall.

    The real problem about AMD is that the "gamer" market for them is pretty much zero. ALUs are huge (so "gamer" for pretty casual levels of "gamer", but that might help push the base level for game design), and GPGPU is apparently a big push. But I don't see any reason for them to push "gamer".
    Reply
  • milkod2001 - Wednesday, June 6, 2018 - link

    Understand AMD makes products where is the biggest demand (machine learning) and $$$ but ignoring gamers is not very cool. Vega was very average and nothing new coming in 2018 is very disappointing. I don't want to be buying mid range GPU from NV for $500+ because there is no pressure from AMD. C'mon AMD! Reply

Log in

Don't have an account? Sign up now