TechInsights Confirms Apple’s A10X SoC Is TSMC 10nm FF; 96.4mm2 Die Size
by Ryan Smith on June 29, 2017 11:30 PM ESTOne of the more intriguing mysteries in the Apple ecosystem has been the question over what process the company would use for the A10X SoC, which is being used in the newly launched 2017 iPad Pro family. Whereas the A10 used in the iPhone was much too early to use anything but 16nm/14nm, the iPad Pro and A10X is coming in the middle of the transition point for high-end SoCs. 16nm is still a high performance process, but if a company pushes the envelope, 10nm is available. So what would Apple do?
The answer, as it turns out, is that they’ve opted to push the envelope. The intrepid crew over at TechInsights has finally dissected an A10X and posted their findings, giving us our first in-depth look at the SoC. Most importantly then, TechInsights is confirming that the chip has been fabbed on TSMC’s new 10nm FinFET process. In fact, the A10X is the first TSMC 10nm chip to show up in a consumer device, a very interesting turn of events since that wasn’t what various production roadmaps called for (that honor would have gone to MediaTek’s Helio X30)
Image Courtesy TechInsights
Apple is of course known for pushing the envelope on chip design and fabrication; they have the resources to take risks, and the profit margins to cover them should they not pan out. Still, that the A10X is the first 10nm SoC is an especially interesting development because it’s such a high-end part. Traditionally, smaller and cheaper parts are the first out the door as these are less impacted by the inevitable yield and capacity challenges of an early manufacturing node. Instead, Apple seems to have gone relatively big with what amounts to their 10nm pipecleaner part.
I say “relatively big” here because while the A10X is a powerful part, and big for a 10nm SoC, in terms of absolute die size it’s not all that big of a chip. In fact by Apple X-series SoC standards, it’s downright small: just 96.4mm2. This is 24% smaller than the 16nm A10 SoC (125mm2), and in fact is even 9% smaller than the A9 SoC (104.5mm2). So not only is it smaller than any of Apple’s 16nm SoCs, but it’s also about 20% smaller than the next-smaller X-series SoC, the A6X. Or, if you want to compare it to the previous A9X, Apple’s achieved a 34% reduction in die size. In other words, Apple has never made an iPad SoC this small before.
One key difference here however is that the X-series SoCs have never before been the leading part for a new process node. It has always been iPhone SoCs that have lead the charge – A9 at 16nm, A8 at 20nm, A7 at 28nm, etc. This does mean that as a pipecleaner part, Apple does need to be especially mindful of the risks. If an X-series SoC is to lead the charge for the 10nm generation, then it can’t be allowed to be too big. Not that this has stopped Apple from packing in three CPU cores and a 12-cluster GPU design.
Speaking of size, TechInsights’ estimates for area scaling are quite interesting. Based on their accounting, they believe that Apple has achieved a 45% reduction in feature size versus 16nm, which is consistent with a full node’s improvement. This is consistent with TSMC’s earlier statements, but given the challenges involved in bringing newer processes to market, it’s none the less exciting to actually see it happening. For chip vendors designing products against 10nm and its 7nm sibling, this is good news, as small die sizes are the rule for pretty much everyone besides Apple.
A10X Architecture: A10 Enlarged
Diving a bit deeper, perhaps the biggest reason that A10X is as small as it is, is that Apple seems to have opted to be conservative with its design. Which again, for a pipecleaner part, is what you’d want to do.
Apple SoC Comparison | ||||||
A10X | A9X | A8X | A6X | |||
CPU | 3x Fusion (Hurricane + Zephyr) |
2x Twister | 3x Typhoon | 2x Swift | ||
CPU Clockspeed | ~2.36GHz | 2.26GHz | 1.5GHz | 1.3GHz | ||
GPU | 12 Cluster GPU | PVR 12 Cluster Series7 | Apple/PVR GXA6850 | PVR SGX554 MP4 | ||
Typical RAM | 4GB LPDDR4 | 4GB LPDDR4 | 2GB LPDDR3 | 1GB LPDDR2 | ||
Memory Bus Width | 128-bit | 128-bit | 128-bit | 128-bit | ||
Memory Bandwidth | TBD | 51.2GB/sec | 25.6GB/sec | 17.1GB/sec | ||
L2 Cache | 8MB | 3MB | 2MB | 1MB | ||
L3 Cache | None | None | 4MB | N/A | ||
Manufacturing Process | TSMC 10nm FinFET | TSMC 16nm FinFET | TSMC 20nm | Samsung 32nm |
We know from Apple’s official specifications that the A10X has 3 Fusion CPU core pairs, up from 2 pairs on A10, and 2 Twister CPU cores on A9X, all with 8MB of L2 cache tied to the CPU. Meanwhile the GPU in A10X is relatively unchanged; A9X shipped with a 12 cluster GPU design, and so does A10X. This means that Apple hasn’t invested their die space gains from 10nm in much of the way of additional hardware. To be sure, it’s not just a smaller A9X, but it’s also not the same kind of generational leap that we saw from A8X to A9X or similar iterations.
Unfortunately TechInsights’ public die shot release isn’t quite big enough or clean enough to draw a detailed floorplan from, but at a very high level we can make out the 12 GPU clusters on the left, along with the CPU cores to the right. Significantly, there aren’t any real surprises here. TechInsights heavily compares it to the A9X and there’s good reason to do so. IP blocks have been updated, but the only major change is the CPU cores, and those don’t take up a lot of die space relative to the GPU cores. This is what allows A10X to be more powerful than A9X while enjoying such a significant die size decrease.
As for the GPU in particular, Apple these days is no longer officially specifying whether they’re using Imagination’s PowerVR architecture in their chips. Furthermore we know that Apple is developing their own GPU, independent from Imagination’s designs, and that it will be rolled out sooner than later. With that said, even prior to today’s die shot release it’s been rather clear that A10X is not that GPU, and the die shot further proves that.
Apple’s developer documentation has lumped in the A10X’s GPU with the rest of the iOS GPU Family 3, which comprises all of the A9 and A10 family SoCs. So from a feature-set perspective, A10X’s GPU isn’t bringing anything new to the table. As for the die shot, as TechInsights correctly notes, the GPU clusters in the A10X look almost exactly like the A9X’s clusters (and the A10’s, for that matter), further indicating it’s the same base design.
Image Courtesy TechInsights
Ultimately what this means is that in terms of design and features, A10X is relatively straightforward. It’s a proper pipecleaner product for a new process, and one that is geared to take full advantage of the die space savings as opposed to spending those savings on new features/transistors.
Otherwise I am very curious as to just what this means for power consumption – is Apple gaining much there, or is it all area gains? A10X's CPU clockspeed is only marginally higher than A9X's, and pretty much identical to A10, so we can see that Apple hasn't gained much in the way of clockspeeds. So does that mean that Apple instead invested any process-related gains in reducing power consumption, or, as some theories go, has 10nm not significantly improved on power consumption versus 16nm? But the answer to that will have to wait for another day.
Source: Capped A10X Photo Courtesy iFixit
87 Comments
View All Comments
Ppietra - Saturday, July 1, 2017 - link
What you are describing is what I described: apps have more than one process, to separate rendering from app logic. A 2 core CPU can do that just as well and if the cores are faster you will probably see better performance.If you want to talk about running another app in the background, or system background tasks, I would think there would be a small responsive advantage of having more than 2 cores CPU in a smartphone, but there isn’t much need for 8 cores in something like that either. But since there isn’t a public benchmark to compare background app multitasking performance between the iPhone and Android phones, it is uncertain which CPU solution has a background performance advantage .
iOS uses every resource it has available, it has basically the same multicore and multiprocessor support as the macOS - Apple designed SoC have 2 to 6 cores (3 cores available per app).
Nokiya Cheruhone - Tuesday, July 4, 2017 - link
People still don't understand that background multitasking (implemented in a way that makes it possible to run user code in the background without restrictions) is useless on mobile devices. Use the APIs for background tasks (like fetching new info or doing push notifs) instead. Thanks for the troll.metafor - Friday, July 7, 2017 - link
The OS itself runs many processes in the background though. In theory, with a small enough and efficient enough core, it makes sense to run that on a core that's separate from the large performance core. This lets the performance core somewhat dedicate itself to a heavy javascript process without context switching.kfishy - Friday, June 30, 2017 - link
Snapdragon 835 was manufactured by Samsung, as the article states this is the first TSMC 10nm SoC shipping in actual devices.pav1 - Friday, June 30, 2017 - link
Moral of the story - wait till A11 to see more. The IPad Pro flies... so be happy with what you have.gigathlete - Friday, June 30, 2017 - link
Thanks for this article Ryan, hopefully you guys will be able to give us a performance preview of this A10X. Seems like a true beast.lefty2 - Friday, June 30, 2017 - link
"One of the more intriguing mysteries in the Apple ecosystem has been the question over what process the company would use for the A10X SoC"Hardly a mystery though, there were several rumours that it was on 10nm
melgross - Friday, June 30, 2017 - link
That’s why it was a mystery. They were rumors.MonkeyPaw - Friday, June 30, 2017 - link
Perhaps the reason Apple went to 10nm with this SOC was to also be able to use it in the next generation iPhone as well? If we're looking at them launching the 7S and an ultra-premium anniversary edition, they might be planning to use this SOC for one of those 2 models.Anticipate - Friday, June 30, 2017 - link
I don’t understand. If the chip has the same amount of GPU cores as the A9X, and they are the same cores, and they are clocked similarly, how is the GPU benchmarking so much faster than the A9X?