Per-Key Quality Testing

In order to test the quality and consistency of a keyboard, we are using a texture analyzer that is programmed to measure and display the actuation force of the standard keyboard keys. By measuring the actuation force of every key, the quality and consistency of the keyboard can be quantified. It can also reveal design issues, such as the larger keys being far softer to press than the main keys of the keyboard. The actuation force is measured in Centinewton (cN). Some companies use another figure, gram-force (gf). The conversion formula is 1 cN = 1.02 gf (i.e. they are about the same). A high-quality keyboard should be as consistent as possible, with an average actuation force as near to the manufacturer's specs as possible and a disparity of less than ±10%. Greater differences are likely to be perceptible by users. It is worth noting that there is typically variance among keyboards, although most keyboard companies will try and maintain consistency - as with other reviews, we're testing our sample only.

The machine we use for our testing is accurate enough to provide readings with a resolution of 0.1 cN. For wider keys (e.g. Enter, Space Bar, etc.), the measurement is taking place at the center of the key, right above the switch. Note that large keys generally have a lower actuation force even if the actuation point is at the dead center of the key. This is natural, as the size and weight of the keycap reduce the required actuation force. For this reason, we do display the force required to actuate every key but we only use the results of the typically sized keys for our consistency calculations. Still, very low figures on medium sized keys, such as the Shift and Enter keys reveal design issues and can easily be perceptible by the user.

Content’s Brown switches are, in terms of specifications, a copy of OUTEMU’s Brown switch. We expected them to perform equally as well but the Content switches seem to be significantly less consistent. The disparity is ±10.89% across the main keys, one of the worst consistency figures we recorded to this date. The average force at the actuation point is just 41.5 cN. The force at the actuation point  naturally should be lower than the switch’s maximum force at the travel tipping point, yet this reading is exceedingly low for Brown switches, meaning that either the switches actuate lower than the expected travel point or they are produced to be a little softer than they should actually be.

Hands-on Testing

I always try to use every keyboard that we review as my personal keyboard for at least a week. My typical weekly usage includes a lot of typing (about 50-100 pages), a few hours of gaming and some casual usage, such as internet browsing and messaging. I personally prefer Cherry MX Brown or similar (tactile) switches for such tasks, meaning that the Content Brown switches should theoretically be ideal for my desktop.

Just as expected, I found the Content Brown switches to be comfortable for long-term typing. Their tactile feedback is very subtle and could easily be confused for Red type switches, yet their satisfactory travel and little resistance makes them easy on the fingers and significantly reduces fatigue. The keys are stable, with minimal wobbling. My only complaint would be the significant force difference between the keys – having used a great number of keyboards to date, I could notice the difference between keys with my fingers while I was paying attention. Most people should be unable to even tell the difference but I believe that the force disparity is excessively high.

For gaming, the Velocifire VM02WS is comfortable for long-term gaming sessions, but I believe that it is a keyboard only suitable for single-player games or casual gaming. First and foremost, the VM02WS lacks any kind of advanced programming. Most gamers would definitely like at least basic programmability features, even if limited to basic remapping and application launching. The other issue is the input lag that is most likely caused by its wireless transmitter. That lag should not be noticeable with the naked eye for any person, except perhaps by very few people with highly sharpened senses. However, it was easy to notice it using a 240 FPS camera, where it could be clearly seen that the keycap was bottoming down before there was a response on the screen. Of course, the key-to-screen lag is not the lag of the keyboard alone, but never before we managed to clearly record a lag using this camera. Considering that a 240 FPS camera is not even considered fast today, the lag must be dozens (if not hundreds) of milliseconds to be this obvious. Although it should be unnoticeable for casual gaming and single player games, it is clearly unsuitable for competitive online gaming.

On the plus side, the battery life of the VM02WS is excellent for a wireless mechanical keyboard. With the backlighting turned off, the VM02WS lasted for four days of everyday use. Turning the backlighting on limits the battery life of the VM02WS to about 9-10 hours, enough for a long living room gaming session before it requires recharging. So Velocifire doesn't completely overcome the inherient disadvantage of a wireless mechanical keyboard – a fully electronic keyboard would find its battery life measured in months – but the VM02WS is delivering days of battery life in a field that often only delivers a dozen or so hours.

Introduction, Packaging & Bundle Final Words and Conclusion
POST A COMMENT

35 Comments

View All Comments

  • Beaver M. - Tuesday, January 21, 2020 - link

    Im not really seeing the switches as problem. The electronics are actually a problem on most keyboards.
    Sometimes they dont register a keypress (probably a bug in their Anti-Ghosting software).

    If you truly want something different, try the Wooting keyboards.
    Reply
  • snarfbot - Tuesday, January 28, 2020 - link

    I was suggesting they review something novel the wooting keyboard you mentioned for example is the optical type with analog switches, pretty cool tech that would make a good review.

    Mx browns on the other hand are a known quantity, who cares about this velocifire board.

    With regard to the keyboards not registering keypresses that could be a problem with their controllers method of implementing n key rollover but i wouldnt say thats common lol.

    What board were you using that didnt work properly?
    Reply
  • santiagodraco - Wednesday, January 29, 2020 - link

    "Velocifire"... come on guys. If you have to steal the product name branding from a major industry player... you aren't worth my time. Sure fire sign the company you are dealing with is fly-by-night is when they have to rely on similar branding to a popular brand moniker that is not their own. Reply
  • Zingam - Friday, August 7, 2020 - link

    It is 21st century. Why are they still making keyboard with the numpad on the right? It should at least be detachable.
    With great difficulty I managed to find and replace my foreverlasting Cherry G80 keyboard 100% with a Chinese 70% with Blue MX switches which perfectly fits in my space. The best part it costs 2-3x less than any other Cherry MX based keyboard.
    Reply
  • dave_the_nerd - Saturday, November 7, 2020 - link

    Got one of these recently and also a Logitech G613. Since we’ve been working from home (computer programmer) during quarantine I wanted something that was wireless to clean up the dining room table. Ended up returning the G613, because the extra keys and permanent wrist rest made it too big. Key feel on both were excellent but I slightly preferred the Velocifire. Battery life isn’t too big a deal; I stick it on my cell phone charger every couple days. The backlight spends most of its time off but is useful now that the sun sets before 5PM.

    Thank you for reviewing this; I wouldn’t have found out about it otherwise. It’s obviously not a perfect keyboard (I’d definitely prefer one with the Cherry Blues from my old Ducky) but it’s been good for me.
    Reply

Log in

Don't have an account? Sign up now