The buzz since Intel announced it was bringing an 18-core CPU to the consumer market has been palpable: users are anticipating this to be Intel’s best performing processor, and want to see it up against the 16-core AMD Threadripper (even at twice the cost). Intel is the incumbent: it has the legacy, the deep claws in software optimization, and the R&D clout to crush the red rival. However, a jump as large as this, moving from 10-core to 18-core in consumer, is a step Intel has been reluctant to make in the past. In this first analysis, we’ve run a few tests on the new 18-core (and 16-core) from Intel to find out the lie of the land.

Dissecting the new Core i9-7980XE and Core i9-7960X

Intel’s high-end desktop (HEDT) platform is designed to be the hard-hitting prosumer (professional consumer) platform providing all the cores without the extras required by the enterprise community. Up until this new generation of 2017 parts, we were treated to three or four CPUs each cycle, carved from Intel’s smallest enterprise silicon, slowly moving from 6 cores in 2009 to 10 cores in 2015, usually aiming for the top CPU to carve the $999 price point (usually at $999, anyway). With the 2017 HEDT platform, called Basin Falls, that changed.

The first launch of Basin Falls earlier this year had three parts. The new socket and chipset were expected as Intel updates every other generation, and this upgrade provided substantially more connectivity than before. The second part was the first three Skylake-X processors, built from Intel’s smallest enterprise silicon (like before), ranging from 6 cores at $389 to 10 cores at $999. Again, this second part was par for the course, albeit with a few microarchitecture changes in the design worth discussing (later). The third part of the initial launch was a bit of a curve ball: Intel configured two processors using their latest consumer microarchitecture, Kaby Lake-X. This is the curveball: normally the prosumer platform is a microarchitecture generation behind, due to development cycles. These two parts are also only quad-core, using repurposed ‘mainstream enthusiast’ parts but set at higher frequencies and higher power budgets, aiming to be the fastest single-threaded processors on the market.

The second launch of Basin Falls is basically what is happening today, and this is the new step from Intel. To add to the three Skylake-X processors already in the stack, using the smallest enterprise silicon, Intel is adding four more Skylake-X processors, this time using the middle-sized enterprise silicon. These new processors build on the others by significantly increasing core count, which comes at the cost of extra power requirements.

Skylake-X Processors
  7800X 7820X 7900X   7920X 7940X 7960X 7980XE
Silicon LCC   HCC
Cores / Threads 6/12 8/16 10/20   12/24 14/28 16/32 18/36
Base Clock / GHz 3.5 3.6 3.3   2.9 3.1 2.8 2.6
Turbo Clock / GHz 4.0 4.3 4.3   4.3 4.3 4.2 4.2
TurboMax Clock N/A 4.5 4.5   4.4 4.4 4.4 4.4
L3 1.375 MB/core   1.375 MB/core
PCIe Lanes 28 44   44
Memory Channels 4   4
Memory Freq DDR4 2400 2666   2666
TDP 140W   140W 165W
Price $389 $599 $999   $1199 $1399 $1699 $1999

All seven processors are listed in the table above. The four new parts are on the right, under the ‘HCC’ (high core count) silicon:

  • The Core i9-7980XE, with 18 cores at $1999
  • The Core i9-7960X, with 16 cores at $1699
  • The Core i9-7940X, with 14 cores at $1399
  • The Core i9-7920X, with 12 cores at $1199 (technically launched August 28th)

As with other product stacks, moving higher up step will cost more than the step previous. Intel (and others) are taking advantage of the fact that some consumers (and especially prosumers) will buy the best part because it can be offset against workflow, or just because it exists.

These four processors are almost identical, aside from core count: all four use the same base design, all four support DDR4-2666 memory out of the box, and all four will support 44 PCIe 3.0 lanes (plus 24 from the chipset). The top three are rated at 165W TDP (thermal design power), while the 12-core part is 140W. There is some variation in the frequencies: while all four parts will support 4.4 GHz as their top TurboMax clock (also known as ‘favored core’, more on this later), the Turbo 2.0 frequencies are all 4.3 GHz except the top two processors, and the base clock frequencies in general decrease the higher up the stack you go. This makes sense, physically: to keep the same TDP as cores are added, the processor will reduce in base clock frequency to meet that same target.

In our initial review of the Skylake-X processors, we were able to obtain the per-core turbo frequencies for each processor.

Despite the low base frequencies, each processor (when all cores are working) will still be above 3.4 GHz. The ‘base’ frequency number is essentially Intel’s guarantee: under normal conditions, this is the highest frequency Intel will guarantee. When AVX or AVX2/AVX512 instructions are being used, the frequencies will be lower than those listed (due to the energy density of these compact instructions) but still above the base frequency, and offering higher overall performance than using the same math in non-AVX formats.

Shown in the table are the turbo frequencies without TurboMax. TurboMax is a new feature first implemented with Broadwell-E, whereby the most efficient cores (as measured during manufacturing and embedded in the processor) can achieve a higher frequency. For Skylake-X, this feature was upgraded from one loaded core to when up to two cores are loaded. This means that the first two columns, labeled 1 and 2, will move up to 4.4 GHz for the top four processors. TurboMax also requires BIOS support, although we had some issues with this, mentioned later in this review.

Intel’s Competition: AMD

Before dissecting the processor, it is important to know what Intel is up against with the new processors. Arguably this is new territory for the consumer space: before this year, if a user wanted more than 10 cores, they had to invest in expensive Xeon processors (or even two of them), and a platform to support it.

Speaking directly for consumer lines, the obvious competition here is from AMD’s Threadripper processors. These are derived from their new Zen microarchitecture and offer 16-cores at $999 or 12 cores at $799.

AMD vs Intel
  TR 1900X TR 1920X TR 1950X   7920X 7940X 7960X 7980XE
Silicon 2 x Zeppelin   HCC
Cores / Threads 8/16 12/24 16/32   12/24 14/28 16/32 18/36
Base Clock / GHz 3.8 3.5 3.4   2.9 3.1 2.8 2.6
Turbo Clock / GHz 4.0 4.0 4.0   4.3 4.3 4.2 4.2
XFR / TBM3  4.2 4.2 4.2   4.4 4.4 4.4 4.4
L2 512 KB/core   1 MB/core
L3 32 MB 64 MB   1.375 MB/core
PCIe Lanes 60   44
Memory Channels 4   4
Memory Freq DDR4 2666   2666
TDP 180W   140W 165W
Price $549 $799 $999   $1199 $1399 $1699 $1999

From a performance perspective, Intel is expected to outright win: AMD’s 16-core processor was pitched against the previous generation’s 10-core processor and usually won, especially in multithreaded benchmarks. The single core performance of the AMD parts were a little behind Intel, but the core count made up for the difference. With Skylake-X adding both single thread performance as well as 8 more cores in the design should give Intel an easy lead in raw performance.

However, AMD has positioned that 1950X at $999, which is half the price of the i9-7980XE. AMD also cites more PCIe lanes from the CPU (60 vs 44), and no confusion over chipset functionality support. Intel’s rebuttal is that the performance is worth the cost, and that it has more chipset PCIe lanes for additional functionality beyond PCIe co-processors like GPUs.

Intel’s Competition: Intel

Intel’s enterprise Xeon platform is still a direct competitor here, in two different ways.

The ‘traditional’ multi-socket enterprise parts will cost substantially more than these new consumer parts, in exchange for some extra features as well, although even moving to a dual socket system with two $999 processors will not be much of a comparison: a Core i9-7980XE compared to a 2P Xeon Silver system will have advantages in core frequency and a unified memory interface, in exchange for maximum memory support and potential 10 gigabit Ethernet or Intel’s QuickAssist Technology.

Ten+ Core Intel Xeon-W Processors (LGA2066)
  Cores Base
Freq.
Turbo
2.0
L3
(MB)
L3/core
(MB)
TDP Price
Xeon W-2195 18/36 2.3 GHz 4.3 GHz 24.75 1.375 140 W TBD
Xeon W-2175 14/28 TBD TBD 19.25 1.375 140 W TBD
Xeon W-2155 10/20 3.3 GHz 4.5 GHz 13.75 1.375 140 W $1440
 
Core i9-7980XE 18/36 2.6 GHz 4.2 GHz 24.75 1.375 165W $1999
Core i9-7960X 16/32 2.8 GHz 4.2 GHz 22.00 1.375 165W $1699

Intel also launched Xeon-W processors in the last couple of weeks. These occupy the middle ground between Skylake-X and the enterprise Xeon-SP parts. Xeon-W uses the same socket as Skylake-X, but requires a completely new chipset, so the motherboards are not interchangeable. These Xeon-W parts are still up to 18 core, almost mirroring the Skylake-X processors, and support quad-channel memory, but support up to 512GB of ECC of it, compared to 128GB of non-ECC. The Xeon-W set of processors cost an extra 10-20% over the Skylake-X parts (add some more for the motherboard too), but for any prosumer that absolutely needs ECC memory, but does not want a dual-processor or does not have double the budget, then Xeon-W is going to be the best bet.

This Review: The Core i9-7980XE and Core i9-7960X

This review is titled ‘Part 1: Workstation’, as for the most part, this review will tackle some of the new processors in workstation type workloads including some initial data using SpecWPC, a standardized industry-standard workstation benchmark suite, as well as our more intense workloads. The review will take a nod towards usability with single-threaded workloads and responsiveness (because it really does matter how fast a PDF opens if this CPU is the main processor in a work system).

The main comparison points for this review will be AMD’s Ryzen Threadripper processors, the 16-core 1950X and the 12-core 1920X. On the Intel side, we retested the 10-core i7-6950X, as well as using our 10-core Core i9-7900X numbers from the initial Skylake review. Unfortunately we do not have the Core i9-7940X or Core i9-7920X yet to test, but we are working with Intel to get these parts in.

[Speaking directly from Ian]: I know a lot of our readers are gamers, and are interested in seeing how well (or poorly) these massive multi-core chips perform in the latest titles at the highest resolutions. Apologies to disappoint, but I am going to tackle the more traditional consumer tasks in a second review, and which will mean that gaming will be left for that review. For the users that have followed my reviews (and Twitter) of late, I am still having substantial issues with my X299 test beds on the gaming results, with Skylake-X massively underperforming where I would expect a much higher result. After having to dedicate recent time to business trips (Hot Chips, IFA) as well as other releases (Threadripper), I managed to sit down in the two weeks between trips to figure what exactly what was going on. I ended up throwing out the two X299 pre-launch engineering samples I was using for the Skylake-X testing, and I received a new retail motherboard only a few days before this review.  This still has some issues that I spent time trying to debug, which I think are related to how the turbo is implemented, which could either be Intel related or BIOS-specific. To cause insult to injury to everyone who wants to see this data, I have jumped on a plane to travel half-way around the world for a business trip during the week of this launch, which leaves the current results inconclusive. I have reached out to the two other motherboard vendors that I haven’t received boards from; just in case the issue I seem to be having is vendor specific. If I ever find out what this issue is, then I will write it up, along with a full Skylake-X gaming suite. It will have to wait to mid-late October, due to other content (and more pre-booked event travel).

I also wanted to benchmark the EPYC CPUs that landed in my office a few days ago, but it was not immediately playing ball. I will have to try and get some Xeon-W / Xeon Gold for comparison with those.

Pages In This Review

  • 1: Dissecting the Intel Core i9-7980XE and Core i9-7960X
  • 2: New Features in Skylake-X: Cache, Mesh, and AVX-512
  • 3: Explaining the Jump to HCC Silicon
  • 4: Opinion: Why Counting ‘Platform’ PCIe Lanes (and using it in Marketing) Is Absurd
  • 5: Test Bed and Setup
  • 6: Benchmark Overview
  • 7: Workstation Performance: SpecWPC v2.1
  • 8: Benchmarking Performance: PCMark 10
  • 9: Benchmarking Performance: Office Tests
  • 10: Benchmarking Performance: Rendering Tests
  • 11: Benchmarking Performance: Encoding Tests
  • 12: Benchmarking Performance: System Tests
  • 13: Benchmarking Performance: Legacy Tests
  • 14: A Few Words on Power Consumption
  • 15: Conclusions and Final Words

Related Reading

New Features in Skylake-X: Cache, Mesh, and AVX-512
Comments Locked

152 Comments

View All Comments

  • mapesdhs - Monday, September 25, 2017 - link

    Ian, thanks for the great review! Very much appreciate the initial focus on productivity tasks, encoding, rendering, etc., instead of games. One thing though, something that's almost always missing from reviews like this (ditto here), how do these CPUs behave for platform stability with max RAM, especially when oc'd?

    When I started building oc'd X79 systems for prosumers on a budget, they often wanted the max 64GB. This turned out to be more complicated than I'd expected, as reviews and certainly most oc forum "clubs" achieved their wonderful results with only modest amounts of RAM, in the case of X79 typically 16GB. Mbd vendors told me published expectations were never with max RAM in mind, and it was "normal" for a mbd to launch without stable BIOS support for a max RAM config at all (blimey). With 64GB installed (I used two GSkill TridentX/2400 4x8GB kits), it was much harder to achieve what was normally considered a typical oc for a 3930K (mab was the ASUS P9X79 WS, basically an R4E but with PLEX chips and some pro features), especially if one wanted the RAM running at 2133 or 2400. Talking to ASUS, they were very helpful and advised on some BIOS tweaks not mentioned in their usual oc guides to specifically help in cases where all RAM slots were occupied and the density was high, especially a max RAM config. Eventually I was able to get 4.8GHz with 64GB @ 2133. However, with the help of an AE expert (this relates to the lack of ECC I reckon), I was also able to determine that although the system could pass every benchmark I could throw at it (all of toms' CPU tests for that era, all 3DMark, CB, etc.), a large AE render (gobbles 40GB RAM) would result in pixel artefacts in the final render which someone like myself (not an AE user) would never notice, but the AE guy spotted them instantly. This was very interesting to me and not something I've ever seen mentioned in any article, ie. an oc'd consumer PC can be "stable" (benchmarks, Prime95 and all the rest of it), but not correct, ie. the memory is sending back incorrect data, but not in a manner that causes a crash. Dropping the clock to 4.7 resolved the issue. Tests like P95 and 3DMark only test parts of a system; a large AE render hammered the whole lot (storage, CPU, RAM and three GTX 580s).

    Thus, could you or will you be able at some point to test how these CPUs/mbds behave with the max 128GB fitted? I suspect you'd find it a very different experience compared to just having 32GB installed, especially under oc'd conditions. It stresses the IMCs so much more.

    I note the Gigabyte specs page says the mbd supports up to 512GB with Registered DIMMs; any chance a memory corp could help you test that? Mind you, I suspect that without ECC, the kind of user who would want that much RAM would probably not be interested in such a system anyway (XEON or EPYC much more sensible).

    Ian.
  • peevee - Monday, September 25, 2017 - link

    "256 KB per core to 1 MB per core. To compensate for the increase in die area, Intel reduced the size of the size of the L3 from 2.5 MB per core to 1.375 MB per core, keeping the overall L2+L3 constant"

    You might want to check your calculator.
  • tygrus - Monday, September 25, 2017 - link

    Maybe Intel saw the AMD TR numbers and had to add 10-15% to their expected freqs. Sure, there is some power that goes to the CPU which ends up in RAM et. al. but these are expensive room heaters. Intel marketing bunnies thought 165w looked better thn 180w to fool the customers.
  • eddieobscurant - Monday, September 25, 2017 - link

    Wow! Another intel pro review. I was expecting this but having graphs displaying intels perf/$ advantage, just wow , you've really outdone yourselves this time.

    Of course i wanted to see how long are you gonna keep delaying the gaming benchmarks of intel's core i9 due to mess rearrangement horrid performance. I guess you're expecting game developers to fix what can be fixed. It's been already several months, but on ryzen you were displaying a few issues since day 1.

    You tested amd with 2400mhz ram , when you know that performance is affected with anything below 3200mhz.

    Several different intel cpus come and go into your graphs only to show that a different intel cpu is better when core i9 lacks in performance and an amd cpu is better.

    Didn't even mention the negligent performance difference bettween the 7960x and 7980xe. Just take a look at phoronix review.

    Can this site even get any lower? Anands name is the only thing keeping it afloat.
  • mkaibear - Tuesday, September 26, 2017 - link

    Erm, there are five graphs on the performance/$ page, and three of them show AMD with a clear price/$ advantage in everything except the very top end and the very bottom end (and one of the other two is pretty much a tie).

    ...how can you possibly call that a pro-Intel review?
  • wolfemane - Tuesday, September 26, 2017 - link

    And why the heck would you want game reviews on these CPUs anyways? By now we KNOW what the results are gonna be and they won't be astonishing. And more than likely will be under a 7700k. Game benchmarks are utterly worthless for these CPUs and any kind of s surprise by the reader in their lack of overall performance in game is the readers fault for not paying attention to previous reviews.
  • Notmyusualid - Tuesday, September 26, 2017 - link

    Sorry to distract gents (and ladies?), and even though I am not a fan of liquid nitrogen, here:

    http://www.pcgamer.com/overclocked-core-i9-7980xe-...
  • gagegfg - Tuesday, September 26, 2017 - link

    EPYC 7551P vs core i9 790XE

    That is the true comparison, or not?
    $2000 vs $2000
  • gagegfg - Tuesday, September 26, 2017 - link

    EPYC 7551P vs core i9 7980XE

    That is the true comparison, or not?
    $2000 vs $2000
  • IGTrading - Tuesday, September 26, 2017 - link

    That's a perfectly valid comparison with the exception of the fact that Intel's X299 platform will look completely handicapped next to AMD's EPYC based solution and it will have just half of the computational power.

Log in

Don't have an account? Sign up now